Lathe Tools

CNMG Style Turning Inserts (Starke)

• Grades suitable for steel, stainless steel, HRSA's and cast iron
• Finishing, medium and roughing chipbreakers available
• CNMG negative geometry with 4 cutting edges 
• Grade SP1325 - CVD coated for high carbon and low alloy steels
• Grade SM3230 - CVD coated for a wide range of stainless steels
• Grade SM5015A - PVD coated for HRSA's, duplex and stainless steels

DNMG Style Turning Inserts (Starke)

• Grades suitable for steel, stainless steel, HRSA's and cast iron
• Finishing, medium and roughing chipbreakers available 
• DNMG negative geometry with 4 cutting edges 
• Grade SM0115 - PVD coated suitable for steels and stainless steels
• Grade SP1325 - CVD coated for high carbon and low alloy steels
• Grade SM3230 - CVD coated for a wide range of stainless steels
• Grade SM5015A - PVD coated for HRSA's, duplex and stainless steels
• Grade SM5115 - PVD coated for HRSA's, duplex, stainless steels, steels and non-ferrous materials

TNMG Style Turning Inserts (Starke)

• Grades suitable for steel, stainless steel, HRSA's and cast iron
• Finishing, medium and roughing chipbreakers available 
• TNMG negative geometry with 6 cutting edges 
• Grade SM3215 - CVD coated suitable stainless steels
• Grade SP1325 - CVD coated for high carbon and low alloy steels
• Grade SP1225S - CVD coated for a wide range of steels
• Grade SM3230 - CVD coated for a wide range of stainless steels

CCGX Style Turning Inserts (Starke)

• CCGX style positive inserts with 2 cutting edges
• Highly polished to prevent swarf build up
• High rake angle for non-ferrous machining
• Grade NK10 suitable for roughing and finishing on aluminiums and plastics

CCMT Style Turning Inserts (Starke)

• Grades suitable for steel, stainless steel, HRSA's and cast iron
• Finishing, medium and roughing chipbreakers available 
• CCMT positive geometry with 2 cutting edges 
• Grade SM0315 - PVD coated suitable for stainless steels
• Grade SM0115 - PVD coated suitable for steels and stainless steels
• Grade SP1025 - CVD coated for a wide range of steels
• Grade SP1315 - CVD coated for machining steels
• Grade SP1325 - CVD coated for high carbon and low alloy steels

DCGX Style Turning Inserts (Starke)

• DCGX style positive inserts with 2 cutting edges
• Highly polished to prevent swarf build up
• High rake angle for non-ferrous machining
• Grade NK10 suitable for roughing and finishing on aluminiums and plastics

DCMT Style Turning Inserts (Starke)

• Grades suitable for steel, stainless steel, HRSA's and cast iron
• Finishing, medium and roughing chipbreakers available 
• DCMT positive geometry with 2 cutting edges 
• Grade SM0315 - PVD coated suitable for stainless steels
• Grade SM0115 - PVD coated suitable for steels and stainless steels
• Grade SP1025 - CVD coated for a wide range of steels
• Grade SP1315 - CVD coated for machining steels
• Grade SP1325 - CVD coated for high carbon and low alloy steels

VNMG Style Turning Inserts (Starke)

• Grades suitable for steel, stainless steel, HRSA's and cast iron
• Finishing, medium and roughing chipbreakers available 
• VNMG negative geometry with 4 cutting edges 
• Grade SM0115 - PVD coated suitable for steels and stainless steels